1.Before you place the order, please make sure your mobile phone with a width of 60mm(2.36inch) to 110mm(4.33 inches).
2.Please do not install the scanner where there is a button on your phone.
3. Please do not install the scanner where there are protruding decorations
Q1:Some customers feedback that after the barcode scanner connects to the phone through Bluetooth, they cannot input and must disconnect the Bluetooth.
A1:The scanner works like a keyboard. when you connect the barcode scanner to your phone, it will replace your keyboard to input.So, you need disconnect the Bluetooth if you need input by keyboard.But, if your phone is iPhone, you can double click the scanning button, then the keyboard will show up to input.(The Android phone don't support it)
3 Scanning Mode
1.Manual Trigger Mode: You need press the trigger button to scanning the barcodes.(Most frequently-used method)
2.Continuous Scan Mode: The scanning light is always on when the scanner is electrified.You can scanning barcode without pressing any trigger button.(Especially fits for the production line at factories)
3.Auto-Sense mode: The scanning light is off until you put the barcode in front of the scanning window.Once the barcode is detected, the scanning light will turn on.You can also scanning barcode without pressing any trigger button.(Especially fits for retail stores, and inventory warehouses.)